End-to-End Solution for Magnetization Automation

Automated Magnetic Charging Integrated Solution

Magnetizing Equipment

Magnetization Automation

Magnet Measuring Instruments

Magnetization Services

Magnetizer work involves high pressure, strong magnetic field and other dangerous factors, must strictly comply with the safety operating procedures to ensure the safety of operators and equipment. The following are detailed safety operating practices:

Pre-operation preparation:

1. Operators must be professionally trained and familiar with equipment performance and safety requirements.
2. Check that the equipment is well grounded and that the supply voltage is normal.
3. Confirm that the work area is free of flammable and explosive materials and that there are no metal objects within 1 meter of the work area.
4. Wear protective equipment such as insulated gloves, insulated shoes, etc., and long hair should be coiled up.

Operational Steps:

1. Pre-startup inspection: Confirm that all parts of the equipment are normal and the parameters are set correctly.
2. Material Preparation: The material to be magnetized is correctly placed in the magnetizing fixture to ensure accurate position.
3. Parameter setting: Set parameters such as magnetizing voltage and magnetizing time according to the material characteristics.
4. Magnetization operation: Press the magnetization button, keep a safe distance (at least 1 meter), and observe the operation status of the equipment.
5. Completion of the operation: After the magnetization is completed, wait for the equipment to be completely discharged before removing the magnetized product.

Safety Precautions:

1. Do not touch high-voltage parts while the equipment is in operation to avoid the risk of electric shock.
2. Strong magnetic fields may affect electronic equipment, and the use of cell phones, watches, etc. is prohibited in the operating area.
3. Any abnormalities found should be stopped immediately and the power supply cut off before checking.
4. Equipment failure should be handled by professional maintenance personnel, is strictly prohibited to dismantle their own maintenance.
5. Regularly check safety protection devices to ensure that they are working properly.

Emergency response:

1. In the event of an electric shock: immediately cut off the power supply, perform cardiopulmonary resuscitation, and promptly send to the doctor.
2. Equipment fire: Use dry powder fire extinguishers to extinguish the fire, and strictly prohibit the use of water to extinguish the fire.
3. Material splash: stop immediately, clean up the scene and check for injuries to personnel.

JiuJu magnetizers have obvious advantages in safety design, adopting multiple safety protection measures, including over-current protection, over-voltage protection, over-temperature protection and so on. JiuJu magnetizers are also equipped with emergency stop buttons and safety interlocking devices to ensure that the power supply can be quickly cut off in case of emergency.

Safety management: JiuJi Magnetizer recommends the establishment of a comprehensive equipment safety file, regular safety inspections and operator training. JiuJu Magnetizer provides professional safety training services to ensure that all operators can strictly comply with safety regulations and safely use the magnetizing equipment.

Magnetization of Magnetic Materials

3C Electronic Magnetization

Motor Rotor Magnetization

Car Speaker Magnetization

New Energy Vehicle Industry

Medical Equipment Industry

Other Industries

久巨充磁視頻案例：醫療磁條充磁

2026年1月7日

Automated Magnetic Charging Integrated Solution 充磁設備 充磁自動化 磁測量儀器 充磁服務 醫療磁條廣泛應用于就診卡、醫保卡等醫療憑證，用于存儲患者基礎信息、醫保參保信息等關鍵數據。受使用頻率、外界環境影響，磁條可能出現磁性減弱或消磁，導致設備無法讀取信息，此時需進行充磁處理。充磁的核心原理是通過特定強度磁場，使磁條內…

久巨充磁視頻案例：橡硅膠與釹鐵硼充磁

2026年1月6日

Automated Magnetic Charging Integrated Solution 充磁設備 充磁自動化 磁測量儀器 充磁服務 本文聚焦橡硅膠與釹鐵硼的充磁核心過程，充磁前無磁性的初始狀態，以及充磁后的磁性表現。通過高斯計實測驗證，明確其充磁后最高磁性單位可達45.9 且經實測充磁后最高磁性可達45.9單位（高斯計測量）。充磁工藝是實現二者磁性轉化的核心環節…

Precision Magnetization for Ferrite Cubes

November 13, 2025

Specializing in ferrite cube micro-magnetization, we deliver customized, precise solutions tailored to ferrite cube material properties. By fine-tuning parameters, we ensure the magnetization meets exact standards, fulfilling high-precision magnetic requirements and adapting to applications with strict demands for magnetization accuracy.

NdFeB Magnet Magnetization Guide – JIUJU Shows How to Select a Magnetizer

November 11, 2025

Key Points for Selecting NdFeB Magnet Magnetizers – JIUJU Professional Magnetization Solutions, Pulse Magnetizer Specifications, Equipment for High-Coercivity Materials, and Selection of Magnetizers for Permanent Magnetic Materials

Magnetization for Magnetic Phone Chargers – Precisely Aligned with Core Magnetic Charging Processes

November 13, 2025

We specialize in magnetization and testing services for magnetic phone charger heads and magnetic data cables. Using precise magnetization processes, we ensure stable magnetic performance of charger heads and professionally verify that data cables meet magnetic performance standards. This guarantees secure connections, reliable use, and compatibility with all mobile magnetic charging scenarios.

JIUJU Electronic Magnetizers: Solving Industry Pain Points and Achieving the Optimal Balance of Performance and Cost

November 11, 2025

JIUJU electronic magnetizers address the challenges faced by electronics manufacturers. Using transformer step-up and pulse phase-shift control technology, they ensure magnetization precision and efficiency. Intelligent dual cooling and optimized material selection reduce costs, achieving a balance of high performance and low cost while improving production efficiency.

Core Logic of Automotive Motor Magnetizer: Directional Magnetization and Intelligent Magnetization Dual Drive

December 31, 2025

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instrument Magnetic Charging Service In the booming development of new energy automobile industry, the motor, as the core power source of the whole vehicle, directly determines the performance of the vehicle's power output efficiency and range performance. The consistency of the magnetic properties of permanent magnets is the core premise to ensure the long-term stable operation of the motor. JiuJu automobile motor magnetizer, with directional magnetization + intelligent magnetic control dual-core technology as the support...

How to break the new energy vehicle motor rotor magnetization problem?

December 5, 2025

New energy vehicle motor rotor magnetization is prone to problems such as uneven magnetic field and low magnetization efficiency, which directly affects motor torque output, vehicle smoothness and vehicle energy consumption. Precise magnetic control technology can achieve precise control of magnetic field strength and distribution through optimized magnetic circuit design, dynamic regulation of magnetization parameters and real-time intelligent monitoring, effectively solving the traditional magnetization pain points, improving magnetization efficiency and rotor magnetic field consistency, and contributing to the improvement of motor operation efficiency, energy consumption and life extension, providing reliable support for the upgrading of new energy automobile motor performance and the high-quality development of the industry.

Motor Rotor Magnetization Revealed: Small Steps, Huge Impact

November 18, 2025

Motor rotor magnetization is a core part of motor manufacturing and maintenance, which realizes the orderly arrangement of magnetic domains of permanent magnets through electromagnetic induction, which can activate the magnetic steel of new motors and guarantee the operation, as well as restore the performance of old motors and reduce the maintenance cost. The process needs to meet the requirements of high-precision matching, magnetic field uniformity, etc. The patented devices of Jiangsu Coretron, Shanghai Hu Xiao and the test system of Jane Instrument Technology provide efficient solutions. This article explains the principle of magnetization, process problems, patented technology and test methods to help the motor industry to improve performance and stability.

NdFeB Magnet Magnetization Guide – JIUJU Shows How to Select a Magnetizer

November 11, 2025

Key Points for Selecting NdFeB Magnet Magnetizers – JIUJU Professional Magnetization Solutions, Pulse Magnetizer Specifications, Equipment for High-Coercivity Materials, and Selection of Magnetizers for Permanent Magnetic Materials

JIUJU 3050 Magnetizer Speaker Transfer Fixture – Dedicated Fixture for NdFeB Magnetization and Adsorption

November 13, 2025

The JIUJU 3050 magnetizer speaker transfer fixture is specially designed for NdFeB magnetization applications. It ensures stable product adsorption during the magnetization process, preventing displacement and guaranteeing precise magnetization. Fully compatible with speaker production workflows, it serves as an efficient supporting device for NdFeB magnetization operations.

JIUJU Speaker Magnetization Practical Guide: Principles and Hands-On Procedures

November 13, 2025

Based on electromagnetic induction, magnetic domains are enhanced through regulated pulse currents. This guide covers practical steps including pre-magnetization equipment setup and speaker inspection, fixture securing, circuit connections, pulse magnetization, as well as post-magnetization testing with a gauss meter and sound quality assessment. It helps ensure precise JIUJU speaker magnetization while maintaining magnetic field strength and audio performance.

JIUJU Four-Station Motor Magnetizer – A Revolutionary Solution to Enhance New Energy Vehicle Motor Manufacturing Efficiency

November 10, 2025

Professional Four-Station Motor Magnetizer Solution – Providing highly efficient, automated magnetization and testing integrated equipment for new energy vehicles, consumer electronics, and industrial motor manufacturers. Significantly boosts production efficiency by 300%, reduces labor costs, and ensures consistent product quality.

久巨充磁視頻案例：醫療磁條充磁

2026年1月7日

Automated Magnetic Charging Integrated Solution 充磁設備 充磁自動化 磁測量儀器 充磁服務 醫療磁條廣泛應用于就診卡、醫保卡等醫療憑證，用于存儲患者基礎信息、醫保參保信息等關鍵數據。受使用頻率、外界環境影響，磁條可能出現磁性減弱或消磁，導致設備無法讀取信息，此時需進行充磁處理。充磁的核心原理是通過特定強度磁場，使磁條內…

久巨充磁視頻案例：五金葉輪充磁流程與適配場景

2026年1月5日

Automated Magnetic Charging Integrated Solution 充磁設備 充磁自動化 磁測量儀器 充磁服務 五金葉輪充磁是通過專用充磁設備對五金材質葉輪進行磁化處理的技術過程，其核心目的是賦予葉輪特定磁性，以滿足電機、水泵、風機等機械裝備在傳動、吸附、定位等場景下的功能需求。該工藝需根據葉輪的材質（如鐵、鋼、合金等）、結構尺寸及所需磁…

JiuJu Magnetization Video Case: Tea Magnetization

December 16, 2025

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Service Tea magnetization is a technical means of applying magnetic fields to tea processing. Tea is processed by means of magnetic fields of a specific strength, with the aim of altering the structure of molecules and the distribution of substances in the tea, thus affecting the quality characteristics of the tea. Tea magnetization is based on the following scientific principles: Effect of magnetic field on water molecules Magnetic field can change the structural arrangement of water molecules, making water...

JiuJu Magnetizing Video Case: Aluminum Tea Can Magnetizing Proofing

December 11, 2025

Automated Magnetic Charging Integrated Solution Magnetizing Equipment Magnetizing Automation Magnetic Measuring Instruments Magnetizing Services Aluminum tea cans are widely popular as ideal containers for tea storage because of their light weight, durability and good sealing properties. However, aluminum itself is a non-magnetic material and is traditionally difficult to magnetize. With years of technical accumulation and innovative research and development, JiuJi has successfully developed a professional magnetizing technology for aluminum tea cans, bringing a brand new solution for tea storage. JiuJu...

JiuJu Magnetization Video Case: Magnetic Bracelet Magnetization

December 10, 2025

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Service Magnetic Bracelet Magnetization is a standardized process that helps to restore the magnetic force of magnetic bracelets, allowing your jewelry to function as it should. The entire process is fast and efficient, and can be completed in a matter of seconds with consistent and reliable results. Magnetization is a specialized process that requires the use of specialized equipment and techniques. By properly magnetizing...